Telos Construction Details
We have used only the finest possible components within the Telos:
- Heavy duty plated through hole boards with shield plane and power plane.
- 1% tolerance metal film resistors.
- Film caps for the signal path (no electrolytics within the signal path).
- Non-microphonic ceramic caps for all caps not directly in the signal path.
- Low ESR electrolytics where necessary
- Well filtered and protected power circuit
- Premium opto-couplers for all signal path routing.
- Internal +9VDC/-9DVC power supply to provide high headroom, quick transient response,
and a low noise floor.
Telos Measurements
4.2" (107mm) W x 4.9" (125mm) L x 1.75" (45mm) H
1lb 2oz (513g)